Logistics · 2026-11-16 · 6 min read

Shipping cosmetic packaging: cartons, pallets and what humidity does

The pack survived the factory. Then it spent six weeks in a container. How to specify cartons, pallet patterns and transit tests so the goods arrive as they left.

Packaging damage is rarely caused by the journey. It is caused by the specification written before the journey, which assumed a pallet travels upright, in dry air, and is never stacked three high in a warehouse.

Most of what follows applies whether the goods move by sea, rail or road. The sea container is simply the harshest of the three.

The carton is part of the product

A bottle that arrives scuffed is a rejected bottle. That makes the carton a quality component, not a transport detail.

Two specifications matter: the board grade and the compression strength. A five-ply carton with a high burst strength is standard for glass; for plastic bottles, three-ply is often enough if the inner packing prevents movement. What matters more than the ply count is whether the carton holds its shape when the pallet is stacked.

Stacking is a moisture problem as much as a weight problem

Kraft board loses a large part of its compression strength in high humidity. A carton rated for 500 kg in a dry test room may carry far less after two weeks in a container crossing the tropics.

That is why a stacking test done in a conditioned lab tells you less than a simple rule: assume a 40-50% loss of stacking strength for a long sea leg, and design the pallet height accordingly.

Pallet patterns and the last carton

A pallet pattern that leaves a gap at the edge concentrates load on the corner cartons, which is exactly where damage starts. Pallet patterns should be specified, drawn, and photographed at loading.

If the pattern does not divide evenly, reduce the layer rather than fill the gap with a partial carton. The partial carton becomes the one that collapses.

Separating the parts that scratch

Acrylic jars, metallised caps and printed tubes all scratch each other. Options, in order of cost: individual polybags, a divider tray, or a shrink sleeve per layer.

For high-gloss decoration, a polybag per unit is the cheapest insurance available. Skipping it to save a few cents per piece is a common false economy.

Transit tests worth asking for

Three tests cover most failure modes:

  • A drop test on the packed carton, from the height the parcel will actually be handled at.
  • A vibration test that simulates road and rail, typically run for a fixed period with the load restrained as it would be on a pallet.
  • A compression test on a full pallet, not a single carton, if the goods will be stacked in storage.

Standards such as ISTA 3A for parcel delivery or ASTM D4169 for distribution cycles give a common language if the buyer and supplier are in different countries. The exact protocol matters less than agreeing it before production.

Documents and the packing list

The packing list should state carton dimensions, gross and net weight, units per carton, cartons per pallet and pallet height. Those five numbers are what a forwarder needs to price and what a warehouse needs to plan.

If the carton count differs from the order confirmation by more than a rounding, say so in writing before the container is sealed.

What to write into the order

  1. Carton grade and compression target.
  2. Units per carton and inner packing method.
  3. Pallet pattern, height and stretch-wrap specification.
  4. Transit test agreed, with pass criteria.
  5. Photographs of the first packed pallet for approval.

Five lines in a purchase order prevent most of the claims we see, and they cost nothing to write.

Packing happens in the cleanroom, but the carton specification decides what arrives
Packing happens in the cleanroom, but the carton specification decides what arrives

Specifying this for a real product? Send the drawing or a reference sample.

Get a Quote Browse Products

Keep reading

Packaging guides · 2026-10-23

How to choose the right material for your cosmetic packaging

PET, PETG, PE, PP and glass each solve a different problem. A practical comparison for brand owners and product developers specifying a pack for the first time.

7 min readRead
Tube packaging · 2026-10-21

Applicator tubes: roller, ceramic, sponge or nozzle?

The applicator decides how the product feels before the formula does. A practical comparison of the four heads we fit most often, and the formulas each one suits.

6 min readRead
Tube packaging · 2026-10-19

Dual-chamber tubes: when two formulas must stay apart

Two-in-one products need the ingredients to meet at the nozzle, not in the tube. How co-extruded dual chambers work, what ratios are possible, and what filling demands.

6 min readRead